Safety Instructions; Limited Warranty; Specifications - Behringer ULTRA CHORUS UC200 Manual

2
ULTRA CHORUS UC200
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen
and remove the pedal cover. Be careful not to scratch the unit.
◊ ◊
The UC200 has no on/off switch. As soon as you insert
the jack into the in connector, the UC200 begins running.
When not using the UC200, remove the jack from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located on the bottom.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.

3. Limited Warranty

For the applicable warranty terms and conditions and additional
information regarding Music Tribe's Limited Warranty, please see
complete details online at musictribe.com/warranty.

4. Specifications

In
Connector
Impedance
Out A
Connector
Impedance
Out B
Connector
Impedance
Power Supply
Behringer PSU-SB
USA/Canada
China/Korea
U.K./Australia
Europe
Japan
Power connector
Battery
Power consumption
¼" TS
500 kΩ
¼" TS
1 kΩ
¼" TS
1 kΩ
9 V , 100 mA regulated
120 V~, 60 Hz
220 V~, 50 Hz
240 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz
2 mm DC jack, negative center
9 V type 6LR61
30 mA