Behringer CL9 User Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER
COMPRESSOR/LIMITER CL9. This ultimate effects pedal is specifically designed to achieve
super-smooth compression and extended sustain. Thanks to its high-performance features
you can compress loud and boost low signals without degrading the original sound.
A compressor limits the dynamic range of a signal. This means that signal peaks will be
attenuated and the level differences between loudest and softest playing are reduced.
This results in a more powerful tone.
The ATTACK TIME control determines how fast the compressor responds to input
signal peaks.
The LEVEL control adjusts the output level.
The SUSTAIN control determines the amount of compression.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The CL9 has no on/off switch. As soon as you insert the plug into the IN
connector, the CL9 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
COMPRESSOR/LIMITER CL9
1. CONTROLS
Top view