How To Use; To Unlock; Passage Feature - Emtek EMTouch Installation & Programming Manual

How to Use

Your Lock is Ready to Use
Your Emtek lock is shipped with two 4-digit user codes and a 6-digit
programming code. These codes are randomly generated at the factory.
(Turn to next page for Programming Instructions.)

To Unlock:

1. Press EMTEK key or touch
3 fingers across screen.
2. Enter 4-digit user codes.
(See sticker located on the inside
trim plate or on page 11).
3. Turn Handle.

Passage feature

(Does not apply to Keypad Storeroom/Gate product)
Activate by turning the inside thumbturn to the unlocked position.
This will engage the outside lever so a code is not required to enter.
To Lock:
1. Rotate Thumbturn from inside.
Locked Unlocked
1
2
3
9