Sherwood RX-773 Operating Instructions Manual page 30

Channel search
• In the XM mode, press the TUNING UP(▲, +)/DOWN(▼, -) buttons repeatedly to select the desired channel.
or
Direct search
• Direct search is useful when you already know the channel number.
1.
In the XM mode, select the direct search mode.
• Each time this button is pressed, the search mode
changes as follows:
→ XM - - - → Category name → OFF
(Direct search) (Category search)
Note: When using channel search or preset search,
press this button to select the search off.
Category search
• Category search allows you to select the desired channel by the selected category.
1.
In the XM mode, select the category search mode.
• Then a category name is displayed.
2.
While displaying "XM - - -", select the desired channel
number with pressing the NUMERIC (0 ~ 9) buttons.
Examples: For "3" :
For "27" :
For "124" :
• When "XM - - -" disappears, repeat again from the
above step 1.
2.
While displaying a category name, press the SELECT
◀/▶ buttons to select the desired category, then
press the ENTER/MEMORY button.
• Each time the SELECT ◀/▶ buttons are pressed, one of
different categories is selected.
• When a category name disappears, repeat again from the
above step 1.
30
within 4 seconds
within 4 seconds within 4 seconds