Sherwood RX-773 Operating Instructions Manual page 28

Manual presetting
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual tuning.
3.
Select the desired preset number (1~30) and press the (ENTER/)MEMORY button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by storing another frequency in its place.
• If "MEM" goes off, start again from the above step 2.
4.
Repeat the above steps1 to 3 to memorize other stations.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Preset stations,etc.
• The ROOM2 settings
Tuning to preset stations
• After selecting the tuner as an input source, select the desired preset number.
or
or
2.
Press the (ENTER/)MEMORY button.
or
• "MEM" is flickering for 5 seconds.
28