Overclock Setting - J&W JW-H61M-D3 User Manual

JW-H61M-D3

4.5.8 OverClock setting

Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Main Advanced
Over Clock Configuration
► CPU Configuration
► Memory Configuration
► Graphics Configuration
► OC Voltage Control
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
►
CPU Confguration
Click <Enter> key to enter its submenu.The following items: setting CPU Multiplier, CPU
power consumption limit, power consumption limit, overclocking switch.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Non Turbo Ratio Override
Power Limit 1 Value (Watt)
Power Limit 2 Switch
Power Limit 2 Value (Watt)
Enhanced Intel SpeedStep Technology
Turbo Mode
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
►
Memory Confguration
Click <Enter> key to enter its submenu.The following items: Setting FSB and memory
parameters act.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Memory Multiplier Configuration
Memory Multiplier
Memory Timing Configuration
CAS# Latency(tCL)
Row Precharge Time(tRP)
RAS# to CAS# Delay(tRCD)
RAS# Active Time(tRAS)
Write Recovery Time(tWR)
Row Refresh Cycle Time(tRFC)
Write to Read Delay(tWTR)
Active to Active Delay(tRRD)
Read CAS# Precharege(tRTP)
Four Active Window Delay(tFAW)
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
Chipset Boot Security OverClock Save & Exit
Number of seconds to wait
for setup activation key.
6 5 5 3 5 ( 0 x F F F F ) m e a n s
indefinite waiting.
→ ←
↑↓
Enter: Select
+/-:
F1: General Help
F7: Previous Values
F8: Fail-Safe Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
OverClock
34 Non Turbo Ratio Override
95
[Enabled]
118
→ ←
[Enabled]
...
[Enabled]
ESC: Exit
OverClock
Memory Multiplier
[1333MHz]
→ ←
↑↓
Enter: Select
9
+/-:
9
F1: General Help
9
F7: Previous Values
24
F8: Fail-Safe Values
10
F9: Optimized Defaults
74
F10: Save & Exit
5
ESC: Exit
5
5
25
- 2 -
User's Manual
: Select Scree
:
Select Item
Change Opt.
: Select Scree
: Select Scree
:
Select Item
Change Opt.