Bios Setup - Cmos Setup Utility; Cmos Setup Utility; Control Keys - J&W JW-H61M-D3 User Manual

JW-H61M-D3
4.5 BIOS Setup — CMOS Setup Utility
• In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.This chapter were based mainly on
the model, unless specif cally stated.
• Do not change the BIOS parameters unless you fully understand its function.

4.5.1 CMOS Setup Utility

After powering up the system, the BIOS message appears on the screen,when the first time
or when CMOS setting wrong, there is following message appears on the screen , but if
the first BIOS be setuped(or loaded default values) and save, the <DEL> key will be
pressed if you will enter BIOS setup menu.
If this message disappears before you respond, restart the system by pressing <Ctrl> +
<Alt>+ <Del> keys, or by pressing the reset button on computer chassis. Only when these
two methods should be fail that you restart the system by powering it off and then back on.
After pressing <F1> or <Del> key, the main menu appears.

4.5.2 Control Keys

Press F1 to pop up a small help window that describes the appropriate keys to use and the
possible selections for the highlighted item.
Please check the following table for the function description of each control key.
Control Key(s)
← →
/
↑ / ↓
+/ -/PU/PD
<Enter>
<ESC>
<F1>
<F7>
<F8>
<F9>
<F10>
Press DEL to Run SETUP
Function Description
Move cursor left or right to select Screens
Move cursor up or down to select items
To Change option for the selected items
To bring up the selected screen
Main Menu - Quit and not save changes into CMOS Status
Page Setup Menu and Option Page Setup Menu - Exit
current page and return to Main Menu
General help
Load Previous Values
Load Failsafe Defaults
Load Optimal Defaults
Save configuration changes and exit setup
- 1 -
User's Manual