J&W JW-H61M-D3 User Manual page 21

JW-H61M-D3
►
RTC Wake Settings
Click <Enter> key to enter its submenu.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Advanced
Wake System With Fixed Time
Wake system with Dynamic Time
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
• Wake System With Fixed Time
Enable or Disabe System wake on alarm event. When enabled,System will wake on the Hr::
min::sec specified.
• Wake system with Dynamic Time
Enable or disable system wake on alarm event. When enabled, system will wake on the
current time + Increase minute(s).
・Press <Esc> key to return to "Advanced" menu.
►
CPU Confguration
Click <Enter> key to enter its submenu.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Advanced
Intel(R) Core(TM) i7-2600 CPU @
EMT64
Max Processor Speed
Min Processor Speed
Processor Speed
Factory power limit
Processor Stepping
Mcrocode Revision
Processor Code
Intel HT Technology
Max Freq Ratio
Set Boot Freq Ratio
Hyper-threading
Active Processor Cores
Limit CPUID Maxinum
Execute Disble Bit
Hardware Prefetcher
Adjacent Cache Line Prefetch
Intel Virtualization Technology
CPU C3 Report
CPU C6 Report
Package C State limit
Local x2APIC
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
[Disabled]
[Disabled]
3.40 GHz
Supported
3400MHz
1600MHz
3400MHz
95 Watts
206a6
28
4
Supported
255
255
[Enabled]
[All]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[No Limit]
[Disabled]
- 20 -
User's Manual
Enable or Disabe System
wake on alarm event.
When enabled,System will
wake on the Hr::min::sec
specified.
→ ←
: Select Screen
:
Select Item
↑↓
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Previous Values
F8: Fail-Safe Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Non Turbo Range: 16 - 34.
Turbo ratio: 35. If out
of range ratio, maximum
or minimum ration is
used. This sets the
maximum ratio.
→ ←
: Select Screen
:
Select Item
↑↓
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Previous Values
F8: Fail-Safe Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit