Boot Setting - J&W nVIDIA MCP78 Series User Manual

nVIDIA MCP78 Series

4.5.5 Boot Setting

Main Advanced
Boot Settings
► Boot Settings Configuration
► Boot Device Priority
► Removable Drives
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
►
Boot Settings Configuration
Click <Enter> key to enter its submenu.
Boot Settings Configuration
Quick Boot
Full screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For 'F1' If Error
Hit 'Del' Message Display
Interrupt 19 Capture
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
• Quick Boot
This item allows you to speed up Power On Self Test (POST) after you power on the
computer. If this is set to [Enabled], BIOS will shorten or skip some check items during POST.
• Full Screen Logo
This item determines to show the full screen logo when booting.
• AddOn ROM Display Mode
Sets the display mode for option ROM.
• Bootup Num-Lock
Allows you to select the power-on state for the NumLock.
• PS/2 Mouse Support
Allows you to enable or disable suport for PS/2 mouse.
• Wait For 'F1' If Error
When set to Enabled,the system waits for the F1 key t be pressed when error occurs.
• Hit 'Del' Message Display
When set to Enabled,the system displays the message "Press DEL to run Setup" durning
POST.
• Interrupt 19 Capture
When set to Enabled, this function allows the option ROMs to trap Interrupt 19.
►
Boot Device Priority
Click <Press Enter> key to enter its submenu, it will be display specifies the boot
sequence from the available devices.
►
Removable Drives
Click <Enter> key to enter its submenu, it will be display specifies the boot device priority
sequence from available removable drives.
BIOS SETUP UTILITY
Boot Security Power
BIOS SETUP UTILITY
Boot
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
[Enabled]
[Enabled]
- 2 -
User's Manual
JUSTw00T! Exit
Configure Settings
during System Boot.
←
Select Screen
Select Item
↑ ↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
←
Select Screen
↑ ↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit