Installation Of The Cpu Cooler; Installation Of Memory Modules - J&W nVIDIA MCP78 Series User Manual

nVIDIA MCP78 Series

2.3.2 Installation of the CPU Cooler

For proper installation, please kindly refer to the instruction manuals of your CPU Cooler.

2.4 Installation of Memory Modules

This mainboard provides four 240-pin DDRII (Double Data Rate) DIMM slots, (G81UM-MKII/
G81UM-PV+ provides two 240pin DDRII DIMM slots) and supports Dual Channel Memory
Technology. For dual channel configuration, you always need to install two identical (the
same brand, speed, size and chip-type) memory modules in the DDRII DIMM slots to activate
Dual Channel Memory Technology. Otherwise, it will operate at single channel mode.
To reach the performance of Dual Channel DDR2, the following rules must be obeyed:
For 2-DIMM dual-channel installation:
Populate DIMM modules of the same type and size on slots [DDR1]+[DDR2], or slots
[DDR3]+[DDR4] .
For 4-DIMM dual-channel installation:
Populate 2 DIMM modules of the same type and size on slots [DDR1]+[DDR2], and
another 2 DIMM modules of the same type and size on slots [DDR3]+[DDR4] .
[DDR1] and [DDR2] slots are made of the same color.
[DDR3] and [DDR4] are made of another same color.
Static electricity can damage the electronic components of the computer or optional
boards. Before starting these procedures, ensure that you are discharged of static
electricity by touching a grounded metal object briefly.
To install system memory:
1. Power off the computer and unplug the
AC power cord before installing or
removing memory modules.
2. Locate the DIMM slot on the board.
3. Hold two edges of the DIMM module
carefully, keep away from touching its
connectors.
4. Align the notch key on the module with
the rib on the slot.
5. Firmly press the module into the slots until the ejector tabs at both sides of the slot
automatically snap into the mounting notch. Do not force the DIMM module in with extra
force as the DIMM module only fits in one direction.
6. To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
Mounting Notch
Ejector Tab
- 1 -
User's Manual
Notch Key
Rib