Table of Contents
Advertisement
Once you have checked the devices for your area
press the center button
screen will display with your newly created area
and prompt you to continue to create a new area by
pressing the center button
to continue to the NEXT STEP by pressing the right
soft key
.
NOTE: You can use the 1 ON button
1 Off button
1
ON
lights ON and OFF in an area that has the selection
box around it.
STEP 5
NOTE: The INSTALL
CHECKLIST screen will appear
with the selection box around
STEP 5 - Set Associations
when NEXT STEP is chosen
from STEP 4.
Press the center button
bring up the ASSOCIATION
screen.
A list of controllers included in
Step 2 that support association
will be displayed.
Scroll to and press the center
button
to select the controller
you wish to associate an area or
areas to.
The CONTROLLER ASSOC
screen will display with the
selection box around 1. Button
prompting you to select the
button on your controller that
you wish to associate an area to. Use side arrow
buttons
Scroll to 2. Area and choose an area you wish to
associate to the button you've selected. This will
allow the button on the chosen controller to control
the desired area.
Selecting 3. Area ON/Off allows you to set an
AREA ON/Off or SCENE command to that button
on your controller (for SCENE commands refer to
Advanced Settings).
10
on the RZCPG to turn the
OFF
Set Associations
to toggle if applicable.
to save. The AREA
to select << NEw >> or
1
INSTALL CHECKLIST
1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations
Back
to
ASSOCIATION
Room Controller
Hall Controller
Den Controller
Back
CONTROLLER ASSOC
Dev: Room Controller
1. < Button 1 >
2. Area #1
3. Area ON/OFF
Cancel
and
OFF
ON
x1
Next Step
x1
Next Step
x1
Save
Advertisement
Table of Contents
