Table of Contents
Advertisement
Leviton's Programmer/Remote, Cat. No. RZCPG, is a multi-
functional device. It uses Z-Wave
programmer, zone or scene controller, remote and timer for
setting up and operating your Vizia
will guide you through the understanding of your RZCPG
functions as a setup controller. Once your network is installed,
your RZCPG may also be used as a wireless controller for
activating events, and controlling your lighting system.
Your RZCPG comes with rechargeable batteries, a
programmer/remote stand, and a power adapter.
NOTE: Upon initial installation, you will need to charge your
RZCPG for twelve (12) hours before programming and use.
wARNING:
rechargeable Ni-MH "AA" size batteries.
fCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.
INTRODUCTION
Leviton only supports the use of the supplied
RZCPG
Programmer/Remote
technology to act as a
TM
RF network. This manual
TM
RZCPG
Stand
Power
Adapter
1
Advertisement
Table of Contents
