Table of Contents
Advertisement
Once your name is displayed,
press the center button
RZCPG will confirm inclusion
and prompt you to continue to
INCLUDE CONTROLLER by
pressing the center button
to continue to the NEXT STEP
by pressing the right soft key
NOTE: The confirmation process will take some
time, specifically in large networks. Remain close to
the controller until the confirmation is complete.
STEP 3
NOTE: The INSTALL
CHECKLIST screen will appear
with the selection box around
STEP 3 - Update Controller
when NEXT STEP is chosen
from STEP 2.
Press the center button
bring up the UPDATE CNTRLS
screen where a list of all the
controllers in the network will be
displayed. With the selection box
around the first controller listed
press the center button
RZCPG will prompt you to stand
within 3 feet of that controller.
Press the right soft key
to update your controller. NOTE:
It is important that you remain
within 3 ft. of the controller
you've selected from the list.
If you are unsure about which
controller you are updating
you can use the "who Is"
command (see pg. 13).
Leviton controllers will blink
during the update process,
confirming you are updating
the correct controller.
Once the RZCPG confirms
UPDATE it will display the updated node
information. Press the center button
8
Update Controller
.The
INCLUDE CNTRLLER
Node included!
Node ID #3:
Room Controller
or
Back
INSTALL CHECKLIST
1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations
Back
to
UPDATE CNTRLS
Room Controller
Hall Controller
. The
Back
(YES)
Please stand within
3 ft from controller
and press YES
to continue
NO
Node Updated!
Node ID #4
Room controller
Return
x1
More? Press
Next Step
x1
Next Step
x1
( 2 )
Who Is
x1
UPDATE
YES
x1
UPDATE
to finalize.
Advertisement
Table of Contents
