Include Dimmers/Switches; Text Editor - Leviton Vizia RF RZCPG User Manual

Programmer/remote, compatible with z wave enabled products

Hide thumbs

Table Of Contents

Table of Contents

Using your RZCPG, follow these steps to set up

your ViziaRf

STEP 1

Pressing the center button

to select Include Dim/Swch

will bring you to the INCLUDE

DIM/SwCH screen and put the

RZCPG into Inclusion Mode.

You will be prompted to press a

button on your Dimmer, Switch or

Plug-In Module. These devices

require a simple one step process (button press) to

include into the network (refer to individual device

instruction sheet). Once the button is pressed on

your Dimmer, Switch or Plug-In Module, the RZCPG

will go through a communication process and assign

the node information for that device. The TEXT

EDITOR will display. You can now name your device.

NOTE: The RZCPG is by default assigned #1.

Using TEXT EDITOR you can

either assign a name from a list

of templates or assign a unique

name to your device.

NOTE: The right soft key

toggle from Template to Abc to

ABC to abc to 123 and back to

Template again. This feature allows you to access

the template names or to select capital/undercase

letters and numerals to name your device.

To use the pre-made Templates,

with Template displayed, use the

up and down arrow buttons

to select a name. The RZCPG

offers a list of over 100 commonly

used names to choose from.

NOTE: The template names are

editable for customization if you

choose to alter them.

network: