Table of Contents
Advertisement
Once you are done press the right soft key
(Save) to complete. You will be prompted to
continue setting associations or to proceed to the
NEXT STEP by pressing the right soft key
STEP 6
NOTE: The INSTALL
CHECKLIST screen will appear
with the selection box around
STEP 6 - Security when NEXT
STEP is chosen from STEP 5.
Press the center button
bring up the SECURITY screen.
Press the center button
select 1. Setup Password.
Enter password using four of the
eight buttons on the RZCPG
(1 ON, 1 Off, 2 ON, 2 Off etc.)
NOTE: The password you
choose MUST be 4 characters
long.
You will be prompted to, and
must re-enter password.
Scroll to 2. and use the side
arrow buttons
between choices OPEN, RZCPG
Lock and System Lock.
Press right soft key
NOTE: Selecting < RZCPG Lock > will lock the
RZCPG. When you return to the HOME screen you
will not have access to the MAIN MENU nor any
screens until you press the right soft key
enter your password.
Selecting < System Lock > will only lock System
Setup, preventing one from changing how the
system is configured until the password is entered
upon prompt.
Security
to toggle
to
to
(Save) to complete.
.
x1
INSTALL CHECKLIST
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations
6. Security
Back
Next Step
x1
SECURITY
1. Setup Password
2. < OPEN >
Back
x1
SECURITY
1. Setup Password
2. < RZCPG Lock >
Back
and
Save
Save
11
Advertisement
Table of Contents
