PHILIPS Respironics ComfortGel Full Instructions For Use Manual page 15

14
bottom strap so that the mask is sitting
gently on your face.
4. Connect the tubing that is included with
your CPAP or bi-level device to the swivel
elbow on the mask (Figure 7).
5. Turn on the airflow.
6. Lie down and breathe normally. Be sure
the mouth remains slightly open. If the
forehead pad does not rest comfortably
against your forehead, Tighten the top
headgear strap. If there are any air leaks
make any final adjustments. Some air
leakage is normal. Do not overtighten the
headgear.
Comfort Tips
Adjust the StabilitySelector on the forehead
support arm to reduce leaks or reduce pres-
sure points at the bridge of the nose or above
the lip. Follow these tips to adjust for leaks.
• For leaks around the bridge of the nose or
into the eyes, gently squeeze the arms of
the StabilitySelector and adjust to a lower
position (Figure 8).
ComfortGel Full
Figure 7
Figure 8