PHILIPS Respironics ComfortGel Full Instructions For Use Manual page 13

12
Removing and Attaching the
Headgear and Mask
Method 1 (Brackets):
a. Removing - Undo the four headgear tabs on
the headgear (Figure 4) and pull the straps out
of the forehead bracket slots and on the Quick
Clips.
b. Reattaching - Thread the top headgear straps
into the slots in the forehead bracket and the
Quick Clips. The headgear tabs fold back to
catch the headgear straps.
Method 2 (Ball Sockets):
a. Removing - Disconnect the Quick Clips and
forehead support arm. Pull the Quick Clip
ball up and away from the socket (Figure 5).
Do not pull the ball through the socket. Next,
disconnect the forehead bracket from the fore-
head support arm by pressing in on the center
of the forehead bracket and then squeezing
the upper sides of the support arm together
to disengage the forehead bracket (Figure 6).
ComfortGel Full
Figure 4
Figure 5
Figure 6