Download Print this page

PHILIPS Respironics ComfortGel Full Fittings Manual

Mask patient and clinician
Hide thumbs Also See for ComfortGel Full:

Advertisement

Quick Links

ComfortGel Full and ComfortFull 2 mask
patient and clinician fitting guide
Sizing the mask
Use either the plastic sizing gauge or the
gauge that is part of the mask package to
determine the appropriate mask size.
Place the sizing gauge over the nose and
mouth. The mouth should be open slightly.
Choose the smallest size mask cushion that
is wider than the mouth and long enough to
extend beyond the lower lip.
Preparing the mask for fitting
Loosen the straps on the headgear
using the EZPeel tabs.
Making initial adjustments
Make initial adjustments while sitting.
1. Place the mask cushion against
the face by first setting the base
of the cushion under the lower lip
then rolling the cushion up over
the nose. Be sure the mouth
remains slightly open.
Gently squeeze the sides of the
StabilitySelector and slide the arm
upward to set the forehead support
arm to its highest position.
2. Pull the headgear over the head.
Next, disconnect the headgear by
releasing one or both ball-and-socket
Quick Clip(s) from the faceplate
socket(s).
3. For easy attachment of a Quick Clip,
use the finger as a guide to find the
position of the socket and press the
clip into the socket.

Advertisement

loading

Summary of Contents for PHILIPS Respironics ComfortGel Full

  • Page 1 ComfortGel Full and ComfortFull 2 mask patient and clinician fitting guide Sizing the mask Use either the plastic sizing gauge or the gauge that is part of the mask package to determine the appropriate mask size. Place the sizing gauge over the nose and mouth.
  • Page 2 Making initial adjustments (continued) 5. Adjust the bottom headgear straps 4. Adjust the top headgear straps by using the EZPeel tabs until they using the EZPeel tabs. Be sure that are even and the mask is gently they are tightened evenly and the sitting on the face.
  • Page 3 Identifying leaks Turn on the PAP and gradually raise the pressure to the prescribed level. Turn the head from side to side while lying on the bed and with the mouth open slightly. Identify areas of leak that may prevent the ability to sleep.
  • Page 4 Use the Quick Clip to remove the mask and maintain mask and headgear adjustments from day-to-day. Removing the ComfortGel Full cushion and flap To remove the cushion and flap with the integrated retaining ring: 3. Separate the cushion from the flap.

This manual is also suitable for:

Comfortfull 2