PHILIPS Respironics ComfortGel Full Instructions For Use Manual page 14

b. Reattaching - Place the ball against the socket
and gently press the ball into the socket. Press
in on the center of the forehead bracket and
then squeeze the upper sides of the support
arm together. Slide the tabs into the forehead
bracket until they latch into place.
Mask Use and Fit
1. Open the headgear to a large size setting
and adjust the forehead arm to the highest
position. To adjust, gently squeeze the
arms of the StabilitySelector and slide the
arm upwards.
2. Disconnect one, or both of the Quick
Clips. Place the mask cushion against the
face by first setting the base of the cushion
under the lower lip then roll the cushion
up the nose. Be sure the mouth remains
slightly open. Pull the headgear on over
your head. Connect the Quick Clips if
detached.
3. Using both hands, adjust the top headgear
strap first by using the headgear tabs on
the headgear. The forehead pad should be
touching your forehead lightly. Adjust the
INSTRUCTIONS FOR USE
13