Regulatory Requirements; Regulatory Statement (Safety); Antenna And Transmission Safety Precautions - Motorola G24 Developer's Manual

Regulatory Requirements

Regulatory Requirements
The Federal Communications Commission (FCC) requires application for certification of digital
devices in accordance with CFR Title 47, Part 2 and Part 15. This includes Electromagnetic
Energy Exposure (EME) testing. As the G24 modem is not a standalone transceiver but is an
integrated module, the G24 cannot be tested by itself for EME certification. It is, however, the
integrator's responsibility to have the completed device tested for EME certification.

Regulatory Statement (Safety)

The following safety precautions must be observed during all phases of the operation, usage,
service or repair of any cellular terminal or mobile incorporating the G24 module. Manufacturers
of the cellular terminal are advised to convey the following safety information to users and
operating personnel, and to incorporate these guidelines into all manuals supplied with the
product. Failure to comply with these precautions violates safety standards of design,
manufacture and intended use of the product. Motorola assumes no liability for customer failure
to comply with these precautions.
•
The G24 must be operated at the voltages described in the technical documentation
•
The G24 must not be mechanically nor electrically changed. Use of connectors should
follow the guidance of the technical documentation
•
The G24 is designed to meet the EMC requirements of ETS 300342
•
When integrating the G24 into a system, Motorola recommends testing the system to
ETS300342-1
•
The G24 meets the safety requirements of EN60950
•
Systems using the G24 are subject to mandatory EMC testing under directive 89/336/EEC
(see item 3 above). Other directives, such as the LVD directive 73/23/EE, may also apply to
a system using the G24 module

Antenna and Transmission Safety Precautions

User Operation
Do not operate your unit when a person is within 8 inches (20 centimeters) of the antenna. A
person or object within 8 inches (20 centimeters) of the antenna could impair call quality and may
cause the phone to operate at a higher power level than necessary.
Important:
Important:
x
The unit must be installed in a manner that provides a minimum separation distance
of 20 cm or more between the antenna and persons and must not be co-located or
operate in conjunction with any other antenna or transmitter to satisfy FCC RF
exposure requirements for mobile transmitting devices.
To comply with the FCC RF exposure limits and satisfy the categorical exclusion
requirements for mobile transmitters, the requirements described in the following
section, "Antenna Installation"
Module Hardware Description
, must be met.
January 1, 2006