Figure 2-19
and
Table 2-8
Figure 2-19: Differential Speaker Circuit
Important:
Figure 2-20: Single-ended Speaker Circuit
January 1, 2006
shows a differential speaker circuit,
gives the speaker specifications.
For safety regulations it is important to place series resistors on the speaker output
lines, as illustrated in
Figure
design stage, but may be changed to a different value during audio safety testing, in
case speaker level limitation is required.
Module Hardware Description
Chapter 2: Hardware Interface Description
Figure 2-20
shows a single-ended speaker circuit
2-19. The resistors value should be R = 0
at the
Ω
31