Power Loss Shut Down; Turning The G24 Off Using At+Mrst - Motorola G24 Developer's Manual

Power On/Off Operation

Power Loss shut down

A low power shut down occurs when G24 senses the external power supply is below the minimal
operating limit. The module will respond by powering down automatically without notice.
This form of power-down is not recommended for regular use since the unexpected power loss
may result in loss of data.

Turning the G24 Off Using AT+MRST

The AT+MRST command initiates a G24 system reset operation, which powers off the G24. This
command emulates the ON_N signal operation for power off.
18 Module Hardware Description January 1, 2006