Osd Function Description - Stryker VisionElect 240-030-930 User Manual

OSD Function Description

Item
Specialty
Color Temperature
RGB adjustment is
available only for
Standard, Arth and
Lap settings)
Red
Green
Blue
Gamma
Setting
Brightness
Contrast
Phase*
Chroma*
Image Sharpness
Video Sharpness*
Image Effect
Scale Mode
Mirror
Freeze Frame
Zoom/Pan
PIP
Advanced
OSD position Control
Screen Control**
DPMS
Auto Source Select
Recall Factory Default
Key lock
Information
User Name Entry
Serial Number
Runtime
Input Format
Actual on-screen display values may vary with updated versions of the firmware and user setting.
* Only available under S or C video input.
** Only available under VGA input.
Function Description
Choose between color temperatures for Default, Standard, Arth, or Lap
Red balance
Green balance
Blue balance
Gamma value
Increase or decrease the brightness
Increase or decrease the contrast
Increase or decrease the Phase level
Increase or decrease the Chroma level
Set image sharpness from 1 to 10
Increase or decrease the video sharpness
Choose scale mode between fill screen, V-fill, H-fill, or one to one
Enable or Disable mirror image
Enable or Disable freeze frame
Enable zoom-in and pan function
Enable PIP (Picture in Picture) function
Control OSD Menu Position, Background, and Timeout
Control and adjust Horizontal, Vertical, Frequency, Phase
Choose DPMS (Display Power Management Signaling)
Adjust Auto Source Select between on and off.
Set to factory default
Set to Key lock mode
Enter custom username display for boot-up display
Display monitor serial number
Display current run time of monitor
Display current input format
EN
English
Range
0-255
0-255
0-255
1.6-2.4
0-100
0-100
0-100
0-100
1-10
0-100
11