Table of Contents
Advertisement
4 4
L M T 1 0 0 A N D L M T 2 0 0 | M A G N E TO S T R I C T I V E L E V E L T R A N S M I T T E R S | F F O I/ L M T 1 0 0/ 2 0 0/ F F - E N R E V. A
STEP 9:
Press
to navigate to the Maximum menu
Press
to edit the maximum value for the output
Press
to scroll through the digits
Press
or
to change the value of the highlighted
digit
Press
to confirm the maximum value for the output
Editing Points
STEP 1:
From the Linearization menu, press
navigate to the Points submenu
Press
to enter the Points submenu
IMPORTANT (NOTE)
1 Current linearization point number (00 – 20)
2 Current value of the measured level
3 Input Value for the currently selected point
4 Output Value for the currently selected point
• The scroll function, accessed by pressing the
allows navigation between the point number "00", the
Input Value <In>, and the Output Value <Out>
STEP 2:
Press
highlighted
Press
STEP 3:
or
to
Press
There are two methods to edit:
STEP 4:
Press
Press
key,
• To change between points, press
at point "00", only
only
can be used, and for any other points both
and
can be used
• To edit the input or output value of the points, press the
key when <In> or <Out> is highlighted respectively
to scroll to the point number, if it is not already
or
to change to other points
to scroll to the Input value <In>
a Press
to capture the current level value (LVL) and
assign it to the input value of this point
b Press
to manually enter the value
to scroll to the Output value <Out>
to enable the point
or
When
can be used, when at point "20"
Advertisement
Table of Contents
