Electrolux EXH09HX1WI User Manual page 8

8 electrolux
• Point the remote control towards the unit's
signal receiver window and press the de-
sired button. The unit generates a beep
when it receives the signal.
• The remote control can send signals from
up to 7 metres away.
Caution!
• Do not allow the signal receiver win-
dow to receive strong direct sunlight,
Set current clock time
There are two clock modes: 12-hour mode
and 24-hour mode.
Example: 5 o'clock in the afternoon
Clock
12-hour mode
24-hour mode
1. To set to the 12-hour mode, press the
CLOCK button once in the first step. To
set to the 24-hour mode, press the
CLOCK button twice in the first step.
2. Press the TIME ADVANCE or REVERSE
button to set the current time.
– Keep the button pressed to advance or
reverse the time display quickly.
3. Press the SET/C button.
– The colon (:) blinks to indicate that the
clock is functioning.
Display
PM 5:00
17:00
• The current time cannot be set when the
Setting air purifying filter
The air purifying filters are packed as
accessory of this unit. During operation of the
air conditioner, the filters remove dust and
since it can adversely affect its opera-
tion. If the signal receiver window is
exposed to direct sunlight, close a
curtain to block the light.
• Do not allow the signal receiver win-
dow to receive strong direct sunlight,
since it can adversely affect its opera-
tion. If the signal receiver window is
exposed to direct sunlight, close a
curtain to block the light.
• The unit can be affected by signals
transmitted from the remote control of
a television, VCR or other equipment
used in the same room.
• Do not leave the remote control in di-
rect sunlight or near a heater. Also,
protect the unit and remote control
from moisture and shock which can
discolour or damage them.
TIMER
MODE OFF 1HR
CLEAN
FAN
SWING
CLOCK
SET
timer is operating.
TIMER
ON
TIMER
OFF
2
TIME ADJUST
3
SET/C
1