Electrolux EXH09HX1WI User Manual page 10

10 electrolux
Basic operation
PLASMA
ON
CLUSTER
OFF
DISPLAY
INDIRECT AIR
MODE OFF 1HR
CLEAN
FAN
SWING
CLOCK
SET
1. Press the MODE button to select the
operation mode.
AUTO HEAT
2. Press the ON/OFF button to start opera-
tion.
– The red OPERATION lamp on the unit
will light.
3. Press the THERMOSTAT button to set
the desired temperature.
Auto/dry mode
The temperature can be changed in 1°C
increments within the range of 2°C higher
to 2°C lower from the temperature
automatically determined by the air
conditioner.
(Example: 1°C higher)
TEMP
TURBO
TIMER
TIMER
ON
TIMER
OFF
TIME ADJUST
SET/C
COOL DRY
C
2
5
3
Heat/cool mode
The temperature can be set within the
1
range of 18 to 32°C.
4. Press the FAN button to set the desired
fan speed.
AUTO
4
In the DRY mode, the fan speed is preset
to AUTO and cannot be changed.
5. To turn off the unit, press the ON/OFF
button again.
The red OPERATION lamp on the unit will
turn off.
Tips about auto mode
In the AUTO mode, the temperature setting
and mode are automatically selected ac-
cording to the room temperature and out-
door temperature when the unit is turned on.
Modes and Temperature Settings
0
29
24°C
21
1
°C
1 Indoor temperature (°C )
2 outdoor temperature (°C )
3 Heat
4 Dry (room temp. - 2°C)
5 Cool
The figures on chart are temperature settings
During operation, if the outdoor temperature
changes, the temperature settings will
automatically slide as shown in the chart.
(Example: 2°C lower)
SOFT LOW
4 5
10 18 28
24°C
25°C
23°C
22°C
3
C
HIGH
2
°C
34
26°C