Table of Contents
Advertisement
The driver has been installed. The system does not require
rebooting. To verify the driver installation, open the Device
Manager and view the driver, as shown below.
ASA-7211 adapter
Updating the Driver in Windows 2000
To update the driver:
1 Open the Windows Device Manager.
2 Expand SCSI & RAID controllers.
3 Right-click the controller identified as an Adaptec Storage
Accelerator 7211 and choose Properties.
4 Select the Driver tab.
5 Click Update Driver and then click Next.
6 Click Display a list... and then click Next.
7 Click Have Disk.
8 Click Browse and browse to the
CD.
9 Click Open and then click OK.
Installing the Initiator Mode Driver
driver folder on the
Win2000
3-3
Advertisement
Table of Contents
