Changing Your iConfig Password
The default user ID is admin. The default password is adaptec.
To change the default password:
1 From the Main Menu, select User Logout and Login Password.
For details, see the Main Menu illustration on
2 Select User Password Change.
3 To complete the change, follow the iConfig instructions.
Configuration Tasks
The following table summarizes the configuration tasks you can
perform using iConfig. The menu options all appear in the Main
Menu illustration on
To perform this task...
View controller and target info
➣
View and set controller, Ethernet,
➣
SLP, and ISNS properties
View and set login parameters
➣
View, add, edit, delete, and rescan
➣
targets
View, add, and delete routing,
➣
DNS, ARP, and Host table entries.
View port transmission statistics,
➣
event messages, initiator login,
iSCSI session statistics and iSCSI
node portal info
Erase or save ROM settings
➣
Upgrade firmware
➣
Logout
➣
Change your password
➣
Save settings
➣
For additional information, refer to the iConfig Utility User's Guide.
page
4-4.
Use this Menu Option...
➣
➣
➣
➣
➣
➣
➣
➣
Configuring Your iSCSI System
page
1. Display Properties
2. Setup Properties
3. Device and Targets
4. Routing, DNS, and ARP
5. Statistics, MIB, and Event Log
6. Firmware and ROM
7. User Logout and Login
Password
8. Immediate Save Settings
4-4.
4-5