Table of Contents
Advertisement
3. Water mains and siphon connection
Warning
Connect only to potable water mains.
All water mains connections should be carried out by a certified plummer.
Warning
Water mains pressure can be set through the H2O pressure regulator placed near the CO2 bottle.
Pressure should be no higher than 3.0 bars and no lower than 2.0 bars.
Complete following operations (Fig. 5):
Connect the flexible hose to the H2O inlet on the unit. Connect water mains to flexible hose.
-
Connect discharge tube to discharge barbed connection on unit and to sink siphon.
-
Warning
Please do not install Refreshment Center farther than 4 meters or please get longer inlet and
discharge tubes.
Water inlet ¾"
Fig. 5
Water discharge ¾"
13
Advertisement
Table of Contents
