Inner Door Reversal; Electrical Connection; Technical Specification - AEG Electrolux ER6933I Installation And Instruction Manual

Inner door reversal

Using a screwdriver release bracket (1) by
pressing on the internal spring (Fig. 10) and
withdraw it from its seat together with the door;
remove plug (2) and fit it in the hole left open on
the opposite side;
turn the door through 180°, remove the bracket
(1) and refit it on the opposite side. Refit the
door and insert the top pin and bottom bracket
(1), pushing it into place.
To ensure correct storage of food, the door is
fitted with a simple spring device which holds it
in the open position until it is properly closed.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate
correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For
operation with different voltages, a suitably sized auto-transformer must be used.
The technical data is indicated in the rating plate on the left side inside the appliance.
42
TECHNICAL SPECIFICATIONS
180
2
PR140
Fig. 10
1
GB