Installation
Warning
In order for the unit to work correctly, the Technical Characteristics specification chart on page. 6
needs to be observed.
Installation steps:
1. Refreshment unit assembly inside kitchen
2. Water mains connection
3. Water filter connection
4. Electric power supply
Package content
Open package and immediately check for any transport damages. During installation please handle
with care.
Inside you should find the following material:
A. Refreshment Unit
B. 2 Sliding Rails
C. Mounting base plate
D. 6 spacers 2x1mm, 2x2mm,
2x3mm
Power supply cord
10
A
B
C
D