Related Manuals for AEG Electrolux PWE9038-M
Summary of Contents for AEG Electrolux PWE9038-M
- Page 1 REFRESHMENT CENTER Built-in appliance INSTRUCTION MANUAL PERFEKT IN FORM UND FUNKTION...
- Page 3 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
-
Page 4: Table Of Contents
INDEX Electrical safety ..................... 5 Electrical safety............................5 Installation..............................6 Use ..............................6 Cleaning..............................6 Environment ............................6 Appliance description ................... 7 Units 7 Identification plate (Fig.2) ........................9 Technical Characteristics .........................9 Installation....................10 Package content ............................ 10 Unit positioning..........................11 Water mains and siphon connection ....................13 Install filter cartridge ........................ -
Page 5: Electrical Safety
Electrical safety This appliance conforms to the following safety electrical European Directives: This manual has been written for your own safety and of others. Please read manual carefully before installation and/or use. Please keep this instruction manual in a safe and dry place. This appliance conforms to the following safety electrical European Directives: 73/23/CEE, 89/336/CEE, 92/31/CEE, 98/37/CEE. -
Page 6: Installation
Installation Please handle appliance with care to prevent damaging of the refrigeration circuit. Avoid prolonged exposure of the appliance to direct sunlight. To guarantee maximum stability and safety, it’s necessary to install the built-in appliance only in AEG, REX and Electrolux sized cabinets. Please follow instruction carefully before, during and after installation. -
Page 7: Appliance Description
Appliance description The Refreshment Unit is a domestic appliance designed to dispense purified cold, carbonated and ambient temperature water and ice-cubes. The appliance has 2 outlet from which the following products can be dispensed: Ambient temperature water Cold water Carbonated water Ice-Cubes. - Page 8 Main on/off switch Power supply socket Filter cartridge CO2 bottle H2O inlet H2O pressure regulator with gauge Filter head H2O drainage Fig. 1b...
-
Page 9: Identification Plate (Fig.2)
Identification plate (Fig. 2) Should you need to contact a technical Assistance Center, make sure you have the serial PWE9038-M 942 490 XXX MODEL 230 V ~ 50 Hz number handy for identification. MAX 190 W The serial number is on the... -
Page 10: Installation
Installation Warning In order for the unit to work correctly, the Technical Characteristics specification chart on page. 6 needs to be observed. Installation steps: 1. Refreshment unit assembly inside kitchen 2. Water mains connection 3. Water filter connection 4. Electric power supply Package content Open package and immediately check for any transport damages. -
Page 11: Unit Positioning
H2O inlet flexible hose and discharge tube Filtration Cartridge Sanitazing cartridge and liquid 2. Unit positioning Please install unit as far away as possible from heat sources Please install unit higher than the water drainage in the kitchen Please don’t install the Refreshment Center farther than 4m from the water main or please use another water inlet and discharge tubes The dimension requirements for the kitchen cabinet are: Height (1): 360mm... - Page 12 Install the mounting base plate inside the kitchen cabinet after checking after checking dimension requirements as shown in Fig. 3. If necessary, please use the spacers to fix the mounting base plate to the cabinet. Mount the 2 sliding rails onto the base plate. Place the Refreshment Unit on the sliding rails.
-
Page 13: Water Mains And Siphon Connection
3. Water mains and siphon connection Warning Connect only to potable water mains. All water mains connections should be carried out by a certified plummer. Warning Water mains pressure can be set through the H2O pressure regulator placed near the CO2 bottle. Pressure should be no higher than 3.0 bars and no lower than 2.0 bars. -
Page 14: Install Filter Cartridge
4. Install filter cartridge Lift locking spring placed under driptray (Fig. 5a). Fig. 5a Pull unit from cabinet. On the left side of the unit please find the filter cartridge (Fig. 6). Fig. 6 Filter cartridge Remove filter plastic cap and install filter in filter head as shown on filter instruction booklet (Fig. - Page 15 Check for water leaks and make sure the CO2 bottle is tightly fixed on the CO2 pressure regulator. Open the pressure regulator valve and set pressure to 3 bars on gauge. Pressure can be increased to 4 bars to increase carbonation levels (Fig. 9). Fig.
-
Page 16: Startup
5. Startup Warning Before plugging unit to power supply, please check for correct power supply voltage and frequency as stated on Technical Characteristic chart (see page 9). Fig. 10 Connect unit to 230V through supplied cord. Electric supply circuit should conform to local laws and regulations. Warning The supplier declines any responsibility should any safety rule not be respected during installation. -
Page 17: Using The Refreshment Unit
This preliminary operation will be carried out every time the unit is turned off and on through the main on/off switch inside the cabinet. During this process the touch control panel is inactive. After 4 minutes turn unit on through on/off button on touch control panel to activate all functions At this point please wait approx. -
Page 18: Dispensing
Dispensing After turning appliance on through on/off switch on touch screen, wait for cooling time before dispensing. Place a glass under dispense nozzle. Press button corresponding to desired selection. Release until desired dispense water level or number of ice-cubes is reached. Please do not dispense more than 1 liter of carbonated water continuously since you might experience CO2 exhaust from... -
Page 19: Allarms
Allarms Led indications Message Led blinks slowly Filter is about to exhaust. 2900 liters have been dispensed. Please change filter as described in the following chapters. Led is lit Filter is about to exhaust. 2980 liters have been dispensed. Please change filter as described in the following chapters. Led is lit All dispense buttons disabled. - Page 20 Leds ambient water blink simultaneously Ice forming bin blocked. Turn unit on/off through main on/off switch on side of unit. Leds ambient water cold water carbonated water Volumetric turbine malfunctioning. Dispense functions enabled but blink simultaneously during dispense operation the 3 leds will blink. Leds carbonated water ambient water...
-
Page 21: Maintenance
Should alarms repeat themselves after all restart attempts, please call service assistance. Maintenance Before any maintenance or cleaning procedure, please switch off the appliance and disconnect it from main by unplugging the power plug. CO2 bottle replacement When the CO2 led turns on, it’s necessary to replace the CO2 bottle as described below: Pull appliance from cabinet (A-Fig. -
Page 22: Sanification + Filtration Cartridge
Sanification + filtration cartridge When the exhaust filter led turns on, it is time to replace the filter cartridge: Turn unit off through main on/off switch (Fig. 11). Pull unit from cabinet (Fig. 5a) and look for the valve near the CO2 cylinder. Close valve (Fig. - Page 23 Install new filter cartridge as shown on filter cartridge instructions (Fig. 7) and open the valve near to the filter cartridge. Turn main on/off switch on and push appliance into cabinet. Wait 4 minutes before turning unit on through the touch button.
- Page 24 The following is a troubleshooting section for malfunctions that are not in the Alarms list above: SYMPTOM PROBABLE CAUSE RESOLUTION Water is not dispensed No power supply Check electrick power supply Water mains inlet solenoid Call technical assistance valve failure The unit has been on for over Probabile refrigerant ga leak Call technical assistance...
-
Page 25: Environment Care
Environment care The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. -
Page 26: Electric Diagram
Electric diagram Ambient water electric valve Compressor Carbonated water electric valve Ice sensor probe Cold water electric valve Dryer filter sensor probe Water main electric valve Flooding probe Hot gas cycle electric valve Minimum water tank level probe Ice bin water charge electric valve MAX Carbonator level probe Microswitch work position MIN Carbonator level probe... -
Page 27: Hydraulic Diagram
Hydraulic diagram Water inlet Water drainage Ice cube tray Cold water Carbonated/Sparkling water Ambient water Water dispense nozzle Cooling coil No return valve Pressure reducer Valve CO2 Cylinder Turbine Electric valve Pump Cartridge filter Carbonator device... -
Page 28: Guarantee/Customer Service
Guarantee/Customer Service Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this AEG- Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. - Page 29 Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.
- Page 30 Addington Way Luton Bedfordshire, LU4 9QQ Tel: 08705 350 350 (*) (*) Calls may be recorded for training purposes...
- Page 31 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:-...
- Page 32 Hellas +30 23 10 56 19 70 4 Limnou Str., 54627 Thessaloniki Hrvatska +385 1 63 23 338 Slavonska avenija 3, 10000 Zagreb Ireland +353 1 40 90 75 Long Mile Road Dublin 12 C.so Lino Zanussi, 26 - Italia +39 (0) 434 558500 33080 Porcia (PN) Latvija...
- Page 36 From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.