Initial Setup - BenQ DV3750 User Manual

Initial Setup

1. Check to make sure that all connections to your display are correct and firm.
2. Press the Power button on the display. The display will turn on. The following First Turn On
screen will appear.
3. Press the Volume or Volume
and then press the Channel
4. Press the Volume or Volume
the Channel
5. (Optional) If Others is selected in Country, press the Volume or Volume
display to select a TV broadcast standard.
6. Press the Channel
INPUT button. The display will start searching for available channels and store them in the
memory. This may take several minutes, depending on the available TV channels of your local
TV system.
7. Press the MENU button on the display to close the menu.
buttons on the display to select a screen display language,
button on the display to go to the next step.
buttons on the display to select your country, and then press
button on the display to go to the next step.
button on the display to select Auto Installation and then press the
buttons on the
Setting up Your Display 11