How To Fill And Empty The Tank - Sunny Health & Fitness SF-RW5866 User Manual

HOW TO FILL AND EMPTY THE TANK

A
A.
How to fill the water tank
Pull out the Water Tank Plug (No. 59).
Insert the vertical tube into the water tank, insert the other side into the bucket (prepared by
customer), press the plastic pump to pump water into the water tank. Please carefully check the
maximum water level (as shown in diagram A).
Insert Water Tank Plug (No. 59) into the water tank.
B. How to pump water out of the tank
Pull out the Water Tank Plug (No. 59).
Insert the vertical tube into the bucket (prepared by customer), then insert the other side into the
water tank, press the plastic pump to pump water out of the water tank (as shown in diagram B).
Insert Water Tank Plug (No. 59) into the water tank.
Clear the water around the water tank to keep the area dry.
WATER LEVEL:
1. The water level gauge is on the side of the tank. The maximum fill level is 6. Never fill it over
this limit. Filling the tank over this limit will void the warranty.
2. The resistance depends on the water level in the tank. Water level 1 is the lowest resistance
and water level 6 is the highest resistance.
NOTE:
1. Fill the tank only with tap water. Add 1 water-purification tablet (1 packet is included). Never use
pool chlorine or chlorine bleach. This will damage the tank and void the warranty.
2. Add a water purification tablet every 6 months or as needed. If water remains cloudy, replace
the water in the tank.
3. Do not consume the tank water. Dispose of the water after pumping it out of the tank.
59
6
B
59