Table Of Contents - TAS ProSpot Manual

Index
1. Packaging
2. Transportation
3. Important safety information
4. Lamp: installation and replacement
5. Operating voltage and frequency
5.1 Selecting operating voltage on the ProSpot power supply
6. Mounting the unit
7. Mains connection
8. Signal connection
9. Powering up
10. DMX addressing
11. Display panel functions
12. DMX 512 channel functions
13. Aligning the lamp in the optical path
14. Automatic repositioning features
15. Gobo Replacement
16. Maintenance
17. Test
17.1 Manual testing of each motor (MAnU)
17.2 DMX level readout (dMin)
17.3 Internal temperature readout (
18. Function settings
18.1 Turning off the display (
18.2 Adjusting display intensity (dint)
18.3 Inhibiting lamp on/off via DMX (dLoF)
18.4 Adjusting fan speed (FAnS)
18.5 Automatic lamp on when fixture is switched on (LAAU)
18.6 Resetting default function settings (dFSE)
19. Electronic alignment of motors
19.1 Calibrating via an external signal source
19.2 Calibrating via ProSpot's on-board controls
20. Error messages
21. Spare parts
)
tEMP
)
dISP