Adjusting Fan Speed (Fans - TAS ProSpot Manual

3) Press the + or – buttons to display dLOF (for Lamp Off Via DMX).
+ --
menu enter
4) Press the enter button to confirm your selection.
5) Press the + or – buttons to display On if you wish the lamp to be switched off
via DMX.
+ --
menu enter
6) Press the + or – buttons to display Off if you wish to inhibit lamp on/off via
DMX.
+ --
menu enter
7 Press the enter button to confirm your selection.

18.4 Adjusting fan speed (FAnS)

This function allows the selection of 3 different minimum fan speeds for the
ProSpot cooling fan.
The 3 possibilities are:
rEG, LoOF, LoHI.
From the SPEC function (point 2)
3) Press the + or – buttons to display FAnS.
+ --
menu enter
rEG
This function allows the fan speed to be adjusted automatically by the unit, in
order for the unit to maintain its own optimum internal temperature ProSpot.
From the FAnS function (point 3)
4) Press the enter button
5) Press the + or – buttons to display rEG.
+ --
menu enter
6) Press the enter button to confirm your selection.
LooF
This function allow the fan level to be maintained at a minimum level as determi-
ned by the operator (via DMX).
When maximum operating temperature is reached, the lamp will turn off auto-
matically without adjusting the fan speed.
From the FAnS function (point 3)
4) Press the enter button
5) Press the + or – buttons to display LooF.
+ --
menu enter
6) Press the enter button to confirm your selection.