Subscribe to Our Youtube Channel
Related Manuals for Lincat PO425/FS
Summary of Contents for Lincat PO425/FS
- Page 1 User and Installation Instructions Pizza Oven Floor Stand and Stacking Kits PO425/FS, PO430/FS, PO630/FS, PO425/SK, PO430/SK, PO630/SK IS407 ECN3364...
- Page 2 CAUTION! This is a Caution symbol. This symbol is used throughout the User Guide whenever there is a risk damaging your Lincat product. Ensure that these warnings are read andunderstood at all times. IS407 ECN3364...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS To prevent injury to yourself or your staff and to avoid damaging the product, please read and follow these safety precautions before setting up and using the unit: • Remove all plastic coatings and clean the unit before use. •... - Page 4 ASSEMBLY OF FLOORSTAND 1. Place the lower shelf upside down on a table. Strip the protective plastic coating from around the 8 holes. 2. Strip all the plastic coating off the legs. 3. Fit three of the legs to the lower shelf using the supplied fasteners. The correct sequence is the bolt on the outside, with a flat washer, then through the table top / shelf and leg.
- Page 5 5. Strip the plastic from around the holes on the table top and lay it upside down on a suitable table. Lift the assembly onto the table top and secure the top using the supplied fasteners. (Figure 3) Figure 3 6.
-
Page 6: Cleaning And Maintenance
INSTALLATION Position the stand on a solid, level surface, leaving a minimum of 100mm at the rear. Adjust the feet on the stand so it is level. Place the oven on the stand, lining up the sides and front of the oven with the floor stand top STACKING KIT PARTS CHECKLIST If an item is missing please contact your dealer. -
Page 7: Service Information
• Brief details of problem • Product code, type number and serial number of unit (both on serial plate) Lincat reserve the right to carry out any work under warranty during normal working hours, i.e. Monday to Friday, 08:30 a.m. – 17:00 p.m.
Need help?
Do you have a question about the PO425/FS and is the answer not in the manual?
Questions and answers