Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CD Automation Revo Sx
Summary of Contents for CD Automation Revo Sx
- Page 1 USER’S MANUAL Rev. 03/2009 Solid-State Relay 4x3,5A – 3x4,5A – 2x7A 00003 CD Automation S.r.l. Via Picasso 34/36 - 20025 – Legnano (MI) – ITALY Tel +39 0331 577479 – Fax +39 0331 579479 E-Mail: info@cdautomation.com - WEB: www.cdautomation.com...
-
Page 2: Important Warning For Safety
All solid-state power controllers emit a certain amount of radio-frequency energy because of the fast switching of the power devices. The CD Automation’s Thyristor unit are in accord with the EMC norms, CE mark. In most installations, near by electronic systems will experience no difficulty with interference. If very sensitive electronic measuring equipment or low-frequency radio receivers are to be used near the unit, some special precautions may be required. -
Page 3: Order Code
CD Automation srl REVO 4x3,5A User’s manual Order Code REVO Sx N°Zone x Current Rating 3,5 A 4,5 A 7,0 A Max Voltage 240V Input - Firing SSR – Zero Crossing Fuse + Fuse Holder IFH for each phase cUl us Approval... -
Page 4: Environmental Installation Conditions
CD Automation srl REVO 4x3,5A User’s manual Installation Before to install the thyristor unit examine for damages or deficiencies. If any is found, notify the carrier immediately. Check that the product features shown on unit cover corresponds to that ordered. - Page 5 CD Automation srl REVO 4x3,5A User’s manual Diagram of control connection 4x3,5A Diagram of control connection 3x4,5A...
- Page 6 CD Automation srl REVO 4x3,5A User’s manual Diagram of control connection 2x7A Note: A suitable device must ensure that the unit can be electrically isolated from the supply, this allows • the qualified people to work in safety (*). Before connecting or disconnecting the unit check that power and control cables are isolated from •...
-
Page 7: Technical Specifications
CD Automation srl REVO 4x3,5A User’s manual Technical Specifications General features: Cover and Socket material: PolymericV2 Mounting: DIN bar (thickness type 1mm Max) Internal Heat-sink: Anodized aluminum Delay switch ON time: 0.5 period Max Delay switch OFF time: 0.5 period Max... - Page 8 • signal Warranty condition CD Automation gives a 12 months warranty to its products. The warranty is limited to repairing and parts substitution in our factory and does exclude products not properly used and fuses. Warranty does not include products with serial numbers deleted.
Need help?
Do you have a question about the Revo Sx and is the answer not in the manual?
Questions and answers