Setting The Date Function; Mode* Button - Gilera Nexus 500 User Manual

Setting the date function (01_09)

Press the «CLOCK» button to set the «DATE» function. Press «CLOCK» for more
than 3 seconds; the day digits will start to flash. Set the day using the «ODO/SET»
button. Press the «CLOCK» button again and the month digits will start to flash. Set
the month using the «ODO/SET» button. Press the «CLOCK» button again and the
year digits will start to flash. Set the year using the «ODO/SET» button.
WARNING
TO KEEP TRACK OF THE JOBS FOR «SERVICE», THE CLOCK MUST BE RESET
EACH TIME THE BATTERY IS DISCONNECTED FROM THE VEHICLE SYSTEM.
CAUTION
IT IS STRONGLY ADVISED NOT TO USE THE FUNCTIONS OF THE DIGITAL
DISPLAY PANEL WHILE THE VEHICLE IS MOVING.

*MODE* button (01_10)

Pushing the "MODE" button for less than a second displays the following function
sequence:
1. MEAN SPEED - the word «MEAN» and Km/h or mph is displayed. The value
is reset by resetting the trip odometer.
2. MAXIMUM SPEED - the word «MAX» and Km/h or mph are displayed. The
value is reset by resetting the trip odometer.
3. MEAN CONSUMPTION - The fuel icon, the word «MEAN» and the km/l or
m/gal icon are displayed. The value is reset by resetting the trip odometer.
4. INSTANT CONSUMPTION - The fuel icon and km/l or m/gal are displayed
5. AUTONOMY - The fuel icon is displayed. If autonomy is reduced below 40
km, this icon is automatically displayed and flashes for 60 seconds. If the low
fuel warning light remains continuously lit, some dashes are shown instead
01_10
of the autonomy value.
16