1. Connect Feed and Freshwater Flush Lines with the supplied 20 feet (6 meters) of 1/2" (12.7 mm) I.D. Inlet
Suction Hose. Secure the hose with two hose clamps offset 180 degrees at each fitting. Ignore any optional
accessory that is not to be installed:
Step
from Outlet of:
1.
Feed Water Connector
2.
Sea Strainer
3.
**Rinse/Clean bucket or container
***Inlet 3-way Clean/Rinse Valve
4.
(center port)
5.
Feed Pump
6.
***Plankton Filter
7.
Air/Oil Separator Outlet
8.
**Unpressurized Potable Water Tank Line
2. Connect Brine Discharge Line with the supplied 20 feet (6 meters) of 3/8" (9.5 mm) O.D. Brine Discharge Tubing:
Step
from Outlet of:
1.
(For Modular) R.O Boost
(For Compact) Pre-Connected
2.
(For Modular) Brine Manifold (on the bottom of the
frame)
(For Compact) Brine Discharge port (on the side of
the frame)
3.
***Discharge Rinse Clean Valve
(left or right port)
4.
***Discharge Rinse Clean Valve
(left or right port)
3. Connect Product Water Line with the supplied 30 feet (9.14 meters) of 3/8" (9.52 mm) O.D. tubing:
Step
from Outlet of:
1.
(For Modular) Product Water Manifold Port 'A'
On the bottom of the frame
(For Compact) Potable Water line (on the right side of
the frame)
2.
Charcoal Filter
3.
***pH Neutralizing Filter
4.
***UV Sterilizer
30
to Inlet of:
Sea Strainer
***Inlet 3-Way Clean/Rinse Valve
(left or right port)
***Inlet 3-way Clean/Rinse Valve
(left or right port)
Feed Pump
***Plankton Filter
Tee on Filter Skid
R.O. Boost Inlet
Freshwater Solenoid Valve on Filter Skid
to Inlet of:
Brine Manifold (on the bottom of the frame)
***Discharge Rinse Clean Valve (center port)
**Rinse Clean bucket or container
Brine Discharge Outlet
to Inlet of:
Charcoal Filter
***pH Neutralizing Filter
***UV Sterilizer
**Potable Water Storage Tank Connector
Ultra Whisper 400-600