Building-In - AEG SK 98843-6I Instruction Book

Table of Contents

Advertisement

Available languages

Available languages

Important
The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed. connect the appliance to
a separate earth in compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if the above safety
precautions are not observed.
This appliance complies with the following E.E.C. Directives:
- 87/308 EEC of 2/6/87 relative to radio interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.
- 89/336 EEC of 3.5.89
(Electromagnetic Compatibility Directive) and subsequent modifications.

Building-in

Dimensioned drawing
See "Installation Instructions"
Please check whether, after installing your
appliance and especially after reversing the
door, the door seal seals right round. A badly
fitting door seal may lead to heavy frosting
and thereby to a higher power consumption.
Warning!
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit
perfectly to the cabinet. In that case, wait for the natural fitting of the gasket
or accelerate this process by heating up the part involved with a normal
hairdrier.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sk 88843-6iSk 98809-6iSk 98849-6i

Table of Contents