Building The Appliance In Under A Worktop - AEG SANTO Installation Instructions Manual

Position the covering cap (M) on the
opposite side.
Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing cavity
of the freezer compartment door.
Lift the freezer compartment door a
little way upwards, fit it into the
upper door bearing, and at the same
time insert the lower door bearing
into the square hole. Small upwards
and downwards adjustments of the
freezer compartment door will make
fitting easier.

Building the appliance in under a worktop

The dimensions of the recessed
installation area must correspond
with those indicated in the figure.
Installation kit
AEG43
1xB
1xA
2
2
1
M
2xC
12
1
2
1
31