Building The Appliance In Under A Worktop - AEG U 86000-4 Operating Instructions Manual

Installation

Building the appliance in under a worktop

The dimensions of the recessed
installation area must correspond
with those indicated in the figure.
Installation kit
1. Two cabinet securing brackets
are supplied with the installa-
tion pack. They need to be
assembled onto the cabinet
prior to cabinet being pushed
into the Kitchen aperture.
2. To fit these brackets remove the two screws at the top left and right
hand front corners of the cabinet.
3. Position the two brackets as shown in the figure and replace the two
securing screws.
10
1xB
1xA
2
2
1
Left hand
bracket
1/a
2xC
12
1
2
1
Right hand
bracket