Table of Contents
Advertisement
Instructions for building-in
Apply joint the sealing strip as shown
in figure.
An additional midpoint location
bracket may be fitted to the appli-
ance (as shown) to assist retention of
the housing side wall.
Drill the unit using a ³ 2,5 mm drill
(10 mm max. penetration.
Fix the square fitting (1) to the appli-
ance.
Fit the appliance in the niche by
making sure that it stands against
the interior surface of the unit on
the side where the door hinges of
the appliances are fitted. Insert the
appliance until the upper strip butts
up against the unit (1) and make
sure that the lower hinge is in line
with the surface of the unit (2).
20
Advertisement
Table of Contents
