Identifying parts and controls
1 Power indicator
Lights when the transmitter is turned on.
2 Power button
Turns the transmitter power on and off.
3 CHANNEL switch* (page 11)
Selects a desired channel (frequency) to
4 VIDEO/AUDIO IN jacks (page 8)
Connects the A/V cables to A/V
equipment in main room.
5 IR EXTENDER jack (page 13)
Connects the IR Blaster (supplied).
Do not connect the other of supplied IR
6 DC IN 6V jack (page 8)
Connects the AC power adaptor
* Make sure to set the CHANNEL switch of the
transmitter and receiver to the same position.
DC IN 6V