ADC Diagnostix Otoscope PMV Series Instruction Manual page 8

Waste Disposal:
Please note that rechargeable batteries must be disposed of as special
waste. You can obtain the relevant information from your local authority
or from your local environmental agency.
4.4. Fitting Instrument Heads
Fit the required instrument head on the receptacle on the
upper part of the handle such that the two recesses of the
lower part of the instrument head fit on the two protruding
guide studs on the battery handle. Press the instrument head
lightly on to the battery handle and twist the handle
clockwise until securely locked (Fig. 2). The head is removed
by reversing the process.
(Fig. 2)
4.5 Locking Instrument Head
Instrument heads are equipped with a security feature. Use enclosed hex
key to lock head onto power handle. To secure, insert hex key into slot on
head and tighten by turning clockwise. Keep the hex key in a convenient
place in case the head must be removed for cleaning or service.
NOTE: Locking the head is recommended on wall mounted systems only.
4.6 Adjusting the Light Intensity
With the ADC ® Adtronic TM electronic rheostat, it is possible to modulate the
light intensity. Smoothly control the applied power by holding the easy grip
dial either turn clockwise or counter-clockwise, varying the light intensity -
stronger or weaker.
ATTENTION: At every switch-on of the battery handle the light intensity
is at 100%. Automatic safety switch-off after 180 seconds.
Explanation of the symbol on the plug-in handle:
Caution: Observe the Operating Instructions!
8