Additional Settings - Audi Symphony Operating Instructions Manual

48 Calling

Additional settings

Applies to vehicles: with cell phone package
Options during a call
Requirement: Ongoing telephone call ⇒ page 44.
– Select: Control button Options > Switch off microphone.
Switching the microphone off and on
When the microphone is switched off your telephone partner
cannot hear anything from your phone. However, you can hear your
telephone partner. Muted is shown in the display.
Replacing a call
When there is an incoming call during an ongoing telephone call,
the Replace and Reject functions appear in the display.
Replace is used to replace the active telephone call by an incoming
call. Reject will reject the incoming call.
The display may still remain visible for several seconds, depending
on the cell phone used. If you use the Replace or Reject functions
while its display is still visible, the current telephone call will be
ended.
Tips
To be alerted to an incoming call during an active call, the function
Call waiting must be activated in your cell phone. The call options
depend on the cell phone and service provider.
Applies to vehicles: with cell phone package
Telephone settings
– Select: Function button
Phone settings.
> function button
TEL SETUP
Bluetooth PIN
The Bluetooth PIN is factory set to 1234. This function is used to
change the Bluetooth PIN.
Factory settings
The cell phone package is reset to default settings. The stored
phone books ⇒ page 42, bonded Bluetooth devices ⇒ page 41 and
mailbox numbers are deleted.
Applies to vehicles: with cell phone package
Call options
– Select: Function button
Call options > Auto answer.
on - An incoming call is answered automatically. As long as the call
has not yet been answered automatically, this can be rejected using
Reject.
off - An incoming call is not answered automatically.
Applies to vehicles: with cell phone package
Mailbox number
– Select: Function button
Mailbox number.
The mailbox number is entered using the speller and stored with OK
in the speller.
Using DEL in the speller, the mailbox number is deleted and
confirmed with OK.
After these are saved, the mailbox can be called up using the control
button Memory.
>
TEL > function button SETUP
TEL > function button SETUP
>
>