Memory Card Reader - Audi Symphony Operating Instructions Manual

– Rotate the control knob to an empty CD location shown
in the display and press the control knob. As soon as the
CD changer is ready to load, Please insert CD appears in
the display.
– Insert the CD straight into the CD tray
side up.
Loading a CD into a specific occupied position
A
– Press the LOAD button
appears in the display.
– Rotate the control knob to an occupied CD location
shown in the display and press the control knob. The
respective CD will be ejected. Please remove CD appears
in the display.
– Remove the CD from the CD tray
changer is ready to load, Please insert CD appears in the
display.
– Insert the CD straight into the CD tray
side up.
If you press the LOAD button a second time while all CDs are being
loaded, the loading procedure is stopped.
The CD is pulled back into the CD changer automatically if it is not
removed from the CD tray within about 30 seconds after it has been
ejected.
Tips
Please follow the information for handling CDs ⇒ page 28.
A
with the label
2
⇒ page 29, fig. 36. The CD list
3
A
. As soon as the CD
2
A
with the label
2
Ejecting a CD
Ejecting a CD
A
– Press the Eject button
1
– Rotate and press the control knob to select the CD to be
ejected in the display of the radio system.
Ejecting all CDs
– Press and hold the Eject button
more than two seconds. All the CDs will be ejected in
turn.
The CD is pulled back into the CD changer automatically if it is not
removed from the CD tray within about 30 seconds after it has been
ejected.
Note
•
Always keep your CDs in their original cases to protect them
from dirt, dust, scratches or other damage.
•
Never expose CDs to direct sunlight.
Tips
•
To cancel ejecting, press the Eject button again
•
Please follow the information for handling CDs ⇒ page 28.

Memory card reader

Introduction
The radio system has a memory card reader. SD or MMC cards can
be loaded in the memory card reader.
Playing media
⇒ page 29, fig. 36.
A ⇒ page 29, fig. 36 for
1
A
.
1
31