System Information - Audi Symphony Operating Instructions Manual

Applies to vehicles: with Satellite Digital Audio Radio Service

System information

The following system messages can be displayed:
System mes- Meaning
sages
ANTENNA No antenna is connected to the tuner, or
there are loose plug contacts on the
antenna cable.
LINKING The tuner is presently not receiving any
satellite signal.
Starting radio operation
Requirement: The radio is on ⇒ page 8.
– Press the function button. The list of stations or
FM/AM
the most recent active radio menu appears in the display.
The menu that was open the last time you listened to the radio is
shown in the display. You can switch between the AM, FM and satel-
lite radio station lists by pressing the
while you are in radio mode.
Fig. 19 Frequency
bands
FM/AM function button
Applies to vehicles: with Satellite Digital Audio Radio Service
Activating your satellite radio service
In order to be able to receive satellite programs, this
service must be enabled.
In order to have the service enabled at your provider, you
need the ID number of the tuner. To show the ID number in
the display:
– Press the SETUP function button in the satellite radio
menu.
– Select Receiver serial number by rotating the control
knob.
– Press the control knob. The ID number will appear on the
Display ⇒ fig. 20.
This number is a 12 character alphanumeric number.
Listening to the radio
Fig. 20 Setup Sirius:
Receiver serial number
19