Display - Audi Symphony Operating Instructions Manual

A
Function buttons
1
Press a function button to start an operating mode. For example,
start the FM/AM operating mode by pressing the
button.
Using the function button, you can open additional
SETUP
settings for the active operating mode.
A
Control buttons
2
To access the function shown in one of the four corners of the
display, press the control button corresponding to this display
corner. For example, the control button in the upper left corre-
sponds to the upper left display corner ⇒ fig. 4.
A
Control knob
3
To select a menu item highlighted in the display, rotate the control
knob to the left or right and press the control knob.
A
Arrow buttons
4
To select the previous or the next radio station, press the
> button.
To select the next track on a CD or memory card, press the
If you press the button within 10 seconds after a track has started
<
to play, playback jumps to the beginning of the previous track.
If you press and hold the button or
<
rewind or fast forward is activated.
Fig. 4 Assigning the
control button to the
button symbol in the

display

FM/AM function
or the
<
button.
>
in CD or SD mode, fast
>
A
Return button
5
Press the RETURN button to cancel a selection you have not yet
confirmed or to return to the next higher menu level.
Display
"Standard" menus
After you press a function button ⇒ page 9, a menu appears in the
display.
General operation 9
Fig. 5 Setup Radio
Fig. 6 Radio submenu